Hopefully just a typo 🫣
Fuse for battery for dash cam
https://topcashback.co.uk/ref/simon | https://surfshark.club/friend/Fbv9yqHV | https://share.octopus.energy/flax-elm-797 | https://electroverse.octopus.energy/network/sign-up?referralCode=flax-elm-797 | https://app.tronity.io/signup/QJJDFDC6
Hi all
Just in the middle of fitting and was going to use fuse 2, the thing is fuse 2 seems combined with fuse 1 and is a 3 bladed single fuse, so how do I put my piggy back fuse in here? Do I just put my 2 bladed piggy back fuse in the same slot as the 3 bladed fuse?
Thanks,
Neale
Just in the middle of fitting and was going to use fuse 2, the thing is fuse 2 seems combined with fuse 1 and is a 3 bladed single fuse, so how do I put my piggy back fuse in here? Do I just put my 2 bladed piggy back fuse in the same slot as the 3 bladed fuse?
Thanks,
Neale
Puma ST Line X 2021.25 1.0 Silver ecobost 125ps mhev.
nealen wrote: ↑Sun Oct 01, 2023 1:41 pm Hi all
Just in the middle of fitting and was going to use fuse 2, the thing is fuse 2 seems combined with fuse 1 and is a 3 bladed single fuse, so how do I put my piggy back fuse in here? Do I just put my 2 bladed piggy back fuse in the same slot as the 3 bladed fuse?
Thanks,
Neale
Please note, it is fuse 2 in the owners manual diagram, not the fuse marked 2 on the actual fuse board. A photo of what you are seeing may help.
-
- Posts: 2
- Joined: Thu Dec 14, 2023 5:45 pm
Hello all,
Hope you are doing very well!
I have another question on the above.
My dashcam Vantrue Nexus 5, has a red wire which i insert to fuse 18! The black connected to the car’s chassis! But there is also a yellow cable, labelled ‘ACC’!!! Where do i need to put that one?
Would appreciate of you know!!! Thank you!
Hope you are doing very well!
I have another question on the above.
My dashcam Vantrue Nexus 5, has a red wire which i insert to fuse 18! The black connected to the car’s chassis! But there is also a yellow cable, labelled ‘ACC’!!! Where do i need to put that one?
Would appreciate of you know!!! Thank you!
alexischry wrote: ↑Thu Dec 14, 2023 5:49 pm But there is also a yellow cable, labelled ‘ACC’!!! Where do i need to put that one?
ACC short for accessory, most people use fuse 2 in the diagram below. It is controlled by the ignition switch so turns the dash cam on when the engine is running and goes off with the ignition off.
-
- Posts: 2
- Joined: Thu Dec 14, 2023 5:45 pm
Thank you!!!
Also, found this for future help.
Also, found this for future help.
-
- Posts: 2
- Joined: Thu Mar 14, 2024 1:24 pm
Hi I have a Ford puma st and would like to fit a dash cam with the parking mode, I was wondering if someone could help regarding which fuses To piggy back into as I don’t want to piggy back into the wrong component and cause any damage
Many thanks
John
Many thanks
John