https://www.turtlewax.com/en-gb/our-pro ... l-cleaner/
This for wheels... I've been using it for a bit with good results.
First clean
So.... Today we've had a decent spell of weather. I've been able to set about the puma, decontaminate the paint and get a decent level of protection on.
See images for a recommendation as to how good autoglym magma is at getting rid of fallout and contaminants from the factory and storage. Paint was super smooth after that so I didn't get the clay out.
Magma turns purple when it reacts to iron particles stuck to your paint. My boot and bonnet were the worst.
I've noticed some paint defects. Q.C ain't what it used to be. It's hard to claim a week after collection.
Shows how little dealers do to cars before collection.
See images for a recommendation as to how good autoglym magma is at getting rid of fallout and contaminants from the factory and storage. Paint was super smooth after that so I didn't get the clay out.
Magma turns purple when it reacts to iron particles stuck to your paint. My boot and bonnet were the worst.
I've noticed some paint defects. Q.C ain't what it used to be. It's hard to claim a week after collection.
Shows how little dealers do to cars before collection.
First Clean since purchase on 28/09/20 - Well impressed with the Autoglym Polar Series.
https://topcashback.co.uk/ref/simon | https://surfshark.club/friend/Fbv9yqHV | https://share.octopus.energy/flax-elm-797 | https://electroverse.octopus.energy/network/sign-up?referralCode=flax-elm-797 | https://app.tronity.io/signup/QJJDFDC6
@Wdf76 - You spray the Magma directly onto the entire car whilst wet in this order?
1. Jet Wash
2. Snow Foam
3. Shampoo
4. Magma
5. Sealant
1. Jet Wash
2. Snow Foam
3. Shampoo
4. Magma
5. Sealant
https://topcashback.co.uk/ref/simon | https://surfshark.club/friend/Fbv9yqHV | https://share.octopus.energy/flax-elm-797 | https://electroverse.octopus.energy/network/sign-up?referralCode=flax-elm-797 | https://app.tronity.io/signup/QJJDFDC6
Exactly that. Semi dry car as you don't want the magma to run straight off. It needs to sit on the paint for 5 mins to get to work. You'll see it turn purple as it reacts to and removes the bonded particles. I use my wash mitt to work the product round and then rinse off. Don't let it dry on the car. You'll be amazed at what comes off. I use it on my wheels too.
Remember magma is for iron fall out, brake dust etc. It will not remove tar spots or sap etc. For this you'll need to clay or use tar remover after magma, I generally only see tar around the wheel arches.
Shampoo again and dry completely so you can be sure you have removed all chemicals.
The pros will then use an IPA solution to panel wipe before using the sealant of their choice. I skip that bit
On top of sealant go go wax or glaze of your choice or both.
Finally stand back and admire your work with a cold or hot beverage.
Ta. How much did it take to cover the car?
https://topcashback.co.uk/ref/simon | https://surfshark.club/friend/Fbv9yqHV | https://share.octopus.energy/flax-elm-797 | https://electroverse.octopus.energy/network/sign-up?referralCode=flax-elm-797 | https://app.tronity.io/signup/QJJDFDC6