LED reversing bulb upgrade..
- stevek1909
- Posts: 111
- Joined: Tue Jun 30, 2020 3:28 pm
- Location: Bridgend
Ok ok... I gave it a go internal cover off no problem wing nut tight but no problem the lens a different story the inner side yep thatβs fine can see behind the lens but how hard are you supposed to pull it looked easy in the handbook was I being to gentle....
Ford Puma ST2 Gold Edition ...Agate Black/Build Date 14.2.2022
- stevek1909
- Posts: 111
- Joined: Tue Jun 30, 2020 3:28 pm
- Location: Bridgend
Hmmmmmmmm.... well got them changed looking good but had a disaster pulled at an angle instead of straight and ping.... off comes the bloody corner!!!! So take heed pull straight not from the inner corner of the lens...
Ford Puma ST2 Gold Edition ...Agate Black/Build Date 14.2.2022
- stevek1909
- Posts: 111
- Joined: Tue Jun 30, 2020 3:28 pm
- Location: Bridgend
Yes it looks a lot better even though Iβll never see it... hopefully the contract adhesive will dry solid and a bit of black gloss paint should do it.... Β£120 on eBay for a lens.. hmmmmmm think Iβll leave it see how it sets first...
Ford Puma ST2 Gold Edition ...Agate Black/Build Date 14.2.2022
Ouch! I'd have to buy another lens.
https://topcashback.co.uk/ref/simon | https://surfshark.club/friend/Fbv9yqHV | https://share.octopus.energy/flax-elm-797 | https://electroverse.octopus.energy/network/sign-up?referralCode=flax-elm-797 | https://app.tronity.io/signup/QJJDFDC6
- stevek1909
- Posts: 111
- Joined: Tue Jun 30, 2020 3:28 pm
- Location: Bridgend
- stevek1909
- Posts: 111
- Joined: Tue Jun 30, 2020 3:28 pm
- Location: Bridgend
To be honest not had chance to look weather has been crap not sure if the glue has set resisting the chance to move it or touch it just in case it falls off...
Ford Puma ST2 Gold Edition ...Agate Black/Build Date 14.2.2022
Thanks to the info in this thread Iβve changed mine to led today. I got as far as pulling the light out but, as @stevek1909 says earlier, it seemed stuck. It turns out thereβs a ball-and-socket type clip, pic attached. Thatβs the left side light, and you can see the socket at the top left. Hopefully this helps the next guy too