I measure the charge level by how hard the car regens especially in sport mode when coasting.
Forscan / APIM Modifications
-
- Posts: 121
- Joined: Mon Jan 20, 2020 8:29 pm
- Location: South East London
So what is it we actually need to buy to get this all working?
Jack. 32. South East London. Ford Puma ST Line X First Edition: Desert Island Blue.
My setup is to use a laptop and i purchased OBDLink EX OBD-II / EOBD Car Diagnostic Interface (USB) designed for ForScan. I the just downloaded forscan and found some videos on youtube as to how to backup and check or modify settings.
Some useful links below.
https://cyanlabs.net/ford-apim-asbuilt-db/
https://docs.google.com/document/d/1-8d ... xIqxY/edit
Some useful links below.
https://cyanlabs.net/ford-apim-asbuilt-db/
https://docs.google.com/document/d/1-8d ... xIqxY/edit
Ford Puma 125 ST-Line X FIRST EDITION Desert Island Blue (previous)
Ford Puma 155 ST-Line X Blazer Blue (current)
Ford Puma 155 ST-Line X Blazer Blue (current)
My cable turned up today and I managed to program the missing surround sound.
I should have backed up the modules as advised in the links above especially as Forscan advised my battery voltage was 11.5v. I'll back them up when I next connect.
I did try and program the auto locking in the BCM which said was successful but no option in the cluster to switch on/off. I've not driven the car to test if it works as the battery is now on charge, maybe I need to look in the IPC and program it in there to activate the locking menu, does anyone know?
I should have backed up the modules as advised in the links above especially as Forscan advised my battery voltage was 11.5v. I'll back them up when I next connect.
I did try and program the auto locking in the BCM which said was successful but no option in the cluster to switch on/off. I've not driven the car to test if it works as the battery is now on charge, maybe I need to look in the IPC and program it in there to activate the locking menu, does anyone know?
There are various settings that influence the auto-lock behavior: One setting affects only the actual status of auto-lock: activated or deactivated and another setting controls whether "auto-lock" is displayed in the board computer menu.
The latter must be set in the IPC module-settings.
Thanks for this, I did think after I'd finished that the IPC might need to be programmed as well.borium wrote: ↑Tue Nov 03, 2020 5:50 pmThere are various settings that influence the auto-lock behavior: One setting affects only the actual status of auto-lock: activated or deactivated and another setting controls whether "auto-lock" is displayed in the board computer menu.
The latter must be set in the IPC module-settings.
I'll take another look once the battery has charged up.
Try https://www.motorcraftservice.com/AsBuilt as you can download the default ASBUILT data from there.mart108 wrote: ↑Tue Nov 03, 2020 5:30 pm My cable turned up today and I managed to program the missing surround sound.
I should have backed up the modules as advised in the links above especially as Forscan advised my battery voltage was 11.5v. I'll back them up when I next connect.
I did try and program the auto locking in the BCM which said was successful but no option in the cluster to switch on/off. I've not driven the car to test if it works as the battery is now on charge, maybe I need to look in the IPC and program it in there to activate the locking menu, does anyone know?
Ford Puma 125 ST-Line X FIRST EDITION Desert Island Blue (previous)
Ford Puma 155 ST-Line X Blazer Blue (current)
Ford Puma 155 ST-Line X Blazer Blue (current)
Thanks I'll take a look.robgee wrote: ↑Tue Nov 03, 2020 6:30 pmTry https://www.motorcraftservice.com/AsBuilt as you can download the default ASBUILT data from there.mart108 wrote: ↑Tue Nov 03, 2020 5:30 pm My cable turned up today and I managed to program the missing surround sound.
I should have backed up the modules as advised in the links above especially as Forscan advised my battery voltage was 11.5v. I'll back them up when I next connect.
I did try and program the auto locking in the BCM which said was successful but no option in the cluster to switch on/off. I've not driven the car to test if it works as the battery is now on charge, maybe I need to look in the IPC and program it in there to activate the locking menu, does anyone know?
@robgee better bring your cable to a social in the near future, I'm sure there will be a few members wanting mods
https://topcashback.co.uk/ref/simon | https://surfshark.club/friend/Fbv9yqHV | https://share.octopus.energy/flax-elm-797 | https://electroverse.octopus.energy/network/sign-up?referralCode=flax-elm-797 | https://app.tronity.io/signup/QJJDFDC6