Replacement washer jets

[Hankers99]

Hi All. Both my front washer jets are partially blocked on my 2019 Puma. I only get a trickle onto the windscreen. Can anyone provide me with a link to purchase replacement jets, please? There are a lot of replacement jets for Fords on ebay but none that I can see that will fit the new Puma. Many thanks for your help.

[Curryhouse]

Hi All. Both my front washer jets are partially blocked on my 2019 Puma. I only get a trickle onto the windscreen. Can anyone provide me with a link to purchase replacement jets, please? There are a lot of replacement jets for Fords on ebay but none that I can see that will fit the new Puma. Many thanks for your help.

No need to replace them. Get a pin, or something like that, and clean them out.

[cianpars]

I find piking them with fuse wire usually works. A pin may be too thick. A pin is usually ok for adjusting the direction of the washers though.

[Hankers99]

Hi All. In the end, I worked out the problem must be a blocked washer bottle filter. My "fix" was as follows:
- take the cap off the washer bottle
- remove a couple of clips from the driver's side bonnet liner
- gently disconnect the main feed to the two washer jets
- fit a tapered ball inflator to the end of a bike track pump
- connect the track pump to the main feed pipe
- gently blow air back through the pipe. You should see the air bubbling at the top of the washer bottle
Lo and behold the water jets now work!

[Sparks]

Seems odd that there was a blockage further along the pipe, unless it was an air lock....Glad you got it fixed though...

[BjNtheBear]

@Sparks, wouldn't be an air block, washer jet motor has "suck and blow" pump would keep running till it pulled the water through

[Sparks]

@Sparks, wouldn't be an air block, washer jet motor has "suck and blow" pump would keep running till it pulled the water through

Shows how much I know...